O-ring kit to fit the Suzuki DR350

O-ring kit to fit the Suzuki DR350

Quick reference code: OR-KIT-DR350

The OR-KIT-DR350 provides standard Buna-N O-rings for all applications that are in contact with oil; Viton O-rings are provided all applications that are in contact with fuel.

O-ring kit contains the following eighteen (19) O-rings:

• OR-1: Two (2) Buna-N O-rings to seal the oil lines to the engine case (SPN# 09280-12008)
• OR-2: One (1) Buna-N O-ring to seal the dip stick to the frame (SPN# 09280-17003)
• OR-3: One (1) Buna-N O-ring to seal the oil strainer to the frame near where the frame oil is drained (SPN# 09280-22008)
• OR-4: One (1) Buna-N O-ring to seal the oil filter to the engine case (SPN# 09280-16005 or SPN# 09280-15007)
• OR-5: One (1) Buna-N O-ring to seal the oil filter cover to the engine case (SPN# 09280-72001)
• OR-6: One (1) Buna-N O-ring to seal the carburetor intake manifold to the cylinder head (SPN# 09280-40010)
• OR-7: Two (2) Buna-N O-rings to seal the valve inspection covers to the cylinder head (SPN# 11177-14D00 or SPN# 11177-14D01)
• OR-8: One (1) Buna-N O-ring to seal the large plug to the magneto cover (SPN# 09280-33004)
• OR-9: One (1) Viton O-ring to seal the pilot air/fuel screw to the carburetor body (SPN# 13295-29900).
  Viton is more resistant to deterioration when in contact with modern fuels.
• OR-10: One (1) Viton O-ring to seal the float valve seat to the carburetor body (SPN# 13374-35C00).
  Viton is more resistant to deterioration when in contact with modern fuels.
• OR-11: One (1) Buna-N O-ring to seal the neutral switch or neutral switch cover to the engine case (SPN# 09280-26005)
• OR-12: One (1) Buna-N O-ring to seal the seal head assembly to the rear shock body
• OR-13: One (1) Viton O-ring to seal the float cage assembly to the carburetor body on BST carburetors (constant velocity or CV); also seals the choke/enricher plunger assembly to the carburetor body on TM carburetors (pumper) (SPN# 13374-46710).
  Viton is more resistant to deterioration when in contact with modern fuels.
• OR-14: One (1) Buna-N O-ring to seal the timing chain tensioner bolt to the timing chain tensioner assembly (SPN# 12832-02A00)
• OR-15: One (1) Buna-N O-ring to seal the starter motor to the left engine case (SPN# 09280-24003)
• OR-16: One (1) Viton O-ring to seal the throttle slide guide to the carburetor body on BST carburetors (constant velocity or CV).
  Viton is more resistant to deterioration when in contact with modern fuels.
• OR-21: One (1) Viton O-ring to seal the carburetor drain plug to the carburetor (SPN# 13249-41310).
  Viton is more resistant to deterioration when in contact with modern fuels.