Laverda wiring harnesses
Wire harnesses and looms for Laverda motorcycles
A regulator Moto Guzzi customer contacted me requesting that I duplicate the wiring harnesses needed for the pair of 1968 Laverda American Eagles he was restoring. I agreed and he dropped off two large bags of wiring and related components.
I duplicated the wiring from the originals he provided. Except where noted, each is a replication of the original Laverda wiring harness. I use the same gauge of wire, the same colors and tracers (stripes), the same length and sheathing, the same terminals, etc. All terminals are of the double crimp, strain relief variety.
As of yet, I have not come across an accurate wiring diagram that correctly reflects the original wiring harness from both 1968 Laverda American Eagles I used as originals. Likewise, I've not been able to identify the official Laverda part numbers for each harness. I suspect that both exist, but are thin on the ground. Should you have either, please let me know.
Furthermore, should you have another Laverda for which you would like me to create a wiring harness or loom, please let me know as I will be more than happy to work with you.
Can't find what you are looking for? Let me know what you need and I'll build to order.
To order, e-mail: [email protected]
Main harness for the Laverda 750 GT American Eagle
Description | Photo | Price |
---|---|---|
Laverda 750 GT American Eagle Note: Main harnesses comprise the |
USD $80.00 |
Sub-harnesses for the Laverda 750 GT American Eagle
Description | Photo | Price |
---|---|---|
Battery ground Connects the battery ground terminal to the frame. |
USD $10.00 | |
Battery positive to starter relay Connects the battery positive terminal to the starter relay. Includes rubber boot for connection at the starter relay (as original). |
USD $17.00 | |
Starter relay to starter Connects the starter relay to the starter. Includes rubber boots for connections at the starter relay and starter (as original). |
USD $17.75 | |
Starter solenoid ground Connects the starter solenoid to ground. |
USD $2.50 | |
Voltage regulator B+ to battery positive Connects the voltage regulator B+ terminal to the battery positive terminal. Includes rubber boot for connection at the voltage regulator (as original). |
USD $7.75 | |
Generator to voltage regulator Connects the generator to the voltage regulator. |
USD $18.25 | |
Voltage regulator ground Connects the voltage regulator to ground.. |
USD $2.50 | |
Ignition points to coils Connects both ignition points to the negative terminals on each coil. Includes rubber boots for connections at each coil (as original). |
USD $11.25 | |
Coil positive to coil positive Connects the positive terminal on one coil to the positive terminal on the other coil. Include rubber boots for connections at each coil (as original). |
USD $7.50 | |
Battery positive to fuse 1 Connects the battery positive terminal to fuse 1. |
USD $2.50 | |
Starter button Connects the starter button to the main harness. Includes necessary |
USD $9.00 | |
Headlight plug (duplicated from serial number 1399) Connects the headlight plug to the key switch panel. This variation uses brown, black, and yellow colored wires and was duplicated from a motorcycle with serial number 1399. Included terminal ends may be fit to each wire after cutting to desired length. |
USD $10.50 | |
Headlight plug (duplicated from serial number 1424) Connects the headlight plug to the key switch panel. This variation uses brown, black, and gray colored wires and was duplicated from a motorcycle with serial number 1424. Included terminal ends may be fit to each wire after cutting to desired length. |
USD $10.50 | |
Headlight high/low switch and horn button (duplicated from serial number 1399) Connects the headlight high/low switch and horn button to the main harness and key switch panel. This variation uses white, black, yellow, and green colored wires and was duplicated from a motorcycle with serial number 1399. Included terminal ends may be fit to each wire after cutting to desired length. |
USD $9.50 | |
Headlight high/low switch and horn button (duplicated from serial number 1424) Connects the headlight high/low switch and horn button to the main harness and key switch panel. This variation uses Yellow/black, black, gray, and blue/black colored wires and was duplicated from a motorcycle with serial number 1424. Included terminal ends may be fit to each wire after cutting to desired length. |
USD $9.50 | |
Warning light to warning light Connects one warning light to the other warning light. |
USD $2.50 | |
Key switch panel to warning light Connects the key switch panel to one of the warning lights. |
USD $2.50 | |
Key switch panel to speedometer and tachometer illumination bulbs Connects the key switch panel to the illumination bulbs for both the speedometer and tachometer. After fitting through bulb holders, tie a single knot in the wire (as original) such that the wire assembly cannot be pulled out from the top (use your original as a guide). Included terminal ends may be fit to each wire after cutting to desired length. |
USD $6.50 |