Sub-harness to support the use of two element front turn signals

Sub-harness to support the use of two element front turn signals

A simple and elegant solution for splitting the power at the distribution block for dual element front turn signals. Typically the dim circuit is used as running lights and the bright circuit is used for the front turn signals.

Using the provided wires and sheathing, extend the existing pigtail wires coming from the turn signals (for the running or parking lights), then join those two wires into the adapter inside the headlight shell. The yellow wire from the main harness will also plug into the adapter. Finally, the short yellow wire will plug into the distribution block. Includes butt crimps, heat shrink, and two sizes of sheathing for connecting to the front turn signals.