View all Loop frame wiring harnesses for sale
Sub-harness to support the use of the K&S 12-0040 universal handlebar switch.
Part number: KS12-0040
Price: $21.25
Sub-harness to support the use of the K&S 12-0040 universal handlebar switch.
No more need to fiddle with butt connectors, soldering, or heat shrink. Just plug the 9-pin connector into the plug that came with your K&S switch, and the other ends into locations inside the headlight. Greatly simplifies installation.
This sub-harness combines the functionality of the original left and right handlebar switches to work with the K&S 12-0040 handlebar switch. Extra ground wire provided because the switch body does not provide the ground. This switch incorporates a kill
switch, which cannot be used as a passing light
(kill
will remain non-functional unless requested). Works with switch pictured below (not included). Many other universal switches would use a very similar wiring harness. I would be happy to create a custom harness for you.
When ordering: Please specify civilian or police handlebars.
The K&S 12-0040 switch is not as popular as the 12-0030 because it lacks a passing light
functionality, replacing it instead with a kill
switch.
NOTE: Civilian applications refer to the civilian method of wiring turn signals (directly to the flasher). Police applications refer to the police method of wiring turn signals (through the toggle switch located on the dash).
IMPORTANT NOTE: As with all switches actuating higher amperage components, I consider relays for the headlight low and high beam circuits a necessity. I sell a very nice relay kit specifically made for this very purpose.
Installation instructions
Reference the standard installation instructions and these additional notes. Connect the following wires the same as with the original left and right handlebar switches:
- Green
- Green/black
- Brown
- Black wire with tinned end
- Purple
- White/black
- Yellow/black
The following wires require different connections:
- Black wire with ring terminal: Connect to distribution panel mounting screws. This is a new wire needed by this switch.