Gregory Bender
 

Step 11: Battery ground

Created:

Updated:

// //

Applicable to these part numbers:

  1. Secure the lug with the 10 mm hole to the left bolt that secures the battery tray to the frame (this bolt is located on the left side of the battery tray, behind the battery, just in front of the rear fender). The 10 mm bolt requires a 17 mm wrench or socket.
  2. CHECK YOUR WORK! Briefly touch the lug with the 6 mm hole to the negative terminal on the battery. Make sure there is no arching, direct shorts, etc. If all is okay, proceed to the next step.
  3. Secure the lug with the 6 mm hole to the negative terminal on the battery.