O-rings for the Suzuki DR650
High quality O-rings at discount prices.
O-rings for the 1990 - 2023 Suzuki DR650 motorcycle
O-rings are also available for the Suzuki DR350
I tired of purchasing multiple USD $2.00 and USD $4.00 OEM Suzuki O-rings for simple oil filter changes or to reseal the valve inspection covers, etc. So, I set out to document and then source appropriately sized O-rings. The result is the list of O-rings shown below. All are fresh, good quality O-rings sourced from a highly reputable USA company made from Buna-N or Viton material and fit very well. Viton is more resistant to deterioration when in contact with modern fuels.
Pricing: O-rings are priced individually or as a kit. See the table below.
Shipping: All shipping is via USPS First Class Mail. I am usually able to ship the same day an order is placed.
USA postage and handling charges are based on the amount of your purchase and are calculated as follows:
- Order $0.01 to $4.99: $6.00
- Order $5.00 to $17.25: $2.50
- Order $17.26 to $99.99: $5.00
- Order $100.00 or more: $10.60
International postage and handling charges are based on the amount of your purchase and are calculated as follows:
- Order $0.01 to $4.99: $10.00
- Order $5.00 to $17.25: $4.00
- Order $17.26 to $99.99: $10.00
- Order $100.00 or more: $41.25
Minimum order amount: No minimum order amount. But, please see postage and handling charges above. I am effectively imposing a minimum order amount of USD $5.00.
O-ring kit to fit the Suzuki DR650
Part Number | Description | Photo | Price |
---|---|---|---|
OR-KIT-DR650 |
O-ring kit to fit the Suzuki DR650 (all 1996 - 2023 model years) Quick reference code: OR-KIT-DR650 The O-ring kit contains the following nineteen (21) O-rings:
|
USD $17.25
Compare to a typical dealer price of USD $93.06 for all O-rings combined. |
Individual O-rings to fit the Suzuki DR650
Part Number | Description | Photo | Price |
---|---|---|---|
SPN# 09280-12008 |
O-ring to seal the oil cooler lines to the engine and oil cooler Quick reference code: OR-1 O-ring to seal the oil cooler lines to the engine and oil cooler (SPN# 09280-12008). Fits 1996 - 2000 model years. Four are required. Sold each. |
USD $0.50
Compare to a typical dealer price of USD $2.66 each. |
|
SPN# 09280-17003 |
O-ring to seal the oil fill cap to the clutch cover Quick reference code: OR-2 O-ring to seal the oil fill cap to the clutch cover (SPN# 09280-17003). Fits 1990 - 2023 model years. One is required. Sold each. |
USD $0.75
Compare to a typical dealer price of USD $1.58 each. |
|
SPN# 09280-16005 |
O-ring to seal the oil filter to the engine case Quick reference code: OR-4 O-ring to seal the oil filter to the engine case (SPN# 09280-16005 or SPN# 09280-15007). Fits 1990 - 2023 model years. One is required. Sold each. |
USD $0.50
Compare to a typical dealer price of USD $1.89 each. |
|
SPN# 09280-72001 |
O-ring to seal the oil filter cover to the engine case Quick reference code: OR-5 O-ring to seal the oil filter cover to the engine case (SPN# 09280-72001). Fits 1990 - 2023 model years. One is required. Sold each. |
USD $0.75
Compare to a typical dealer price of USD $4.68 each. |
|
SPN# 09280-33004 |
O-ring to seal the large plug to the magneto cover Quick reference code: OR-8 O-ring to seal the large plug to the magneto cover (SPN# 09280-33004). Fits 1990 - 2023 model years. One is required. Sold each. |
USD $0.50
Compare to a typical dealer price of USD $2.16 each. |
|
SPN# 13295-29900-BUNA |
Buna-N O-ring to seal the pilot air/fuel screw to the carburetor body Quick reference code: OR-9 O-ring to seal the pilot air/fuel screw to the carburetor body (SPN# 13295-29900). Buna-N is less expensive than Viton material, but Buna-N does not hold up as well when in contact with modern fuels. One is required per carburetor. Fits 1994 - 2023 model years. One is required. Sold each. |
Buna-N USD $0.50Compare to a typical dealer price of USD $4.35 each. |
|
SPN# 13295-29900-VITON |
Viton O-ring to seal the pilot air/fuel screw to the carburetor body Quick reference code: OR-9-VITON O-ring to seal the pilot air/fuel screw to the carburetor body (SPN# 13295-29900). The cost for Viton is higher, but Viton is more resistant to deterioration than Buna-N when in contact with modern fuels. One is required per carburetor. Fits 1994 - 2023 model years. One is required. Sold each. |
Viton USD $1.50Compare to a typical dealer price of USD $4.35 each. |
|
SPN# 13374-35C00 |
Lager O-ring to seal the float to the carburetor body Quick reference code: OR-10-VITON Lager O-ring to seal the float to the carburetor body (SPN# 13374-35C00). Available in Viton material only. Viton is more resistant to deterioration when in contact with modern fuels. One is required per carburetor. Fits 1990 - 2023 model years. One is required. Sold each. Other applications: This also fits the float valve seat used on Mikuni BSR36 carburetors as fit to the Suzuki GSF 1200 Bandit, GSF 1200S Bandit, and other models (Needle Valve Seat part numbers KV-10 or KV/10 or 002-709). |
USD $1.50
Compare to a typical dealer price of USD $5.88 each. |
|
SPN# 13374-46710 |
Smaller O-ring to seal the float cage assembly to the carburetor body Quick reference code: OR-13-VITON Smaller O-ring to seal the float cage assembly to the carburetor body (SPN# 13374-46710). Available in Viton material only. Viton is more resistant to deterioration when in contact with modern fuels. Fits 1990 - 2023 model years. One is required. Sold each. |
USD $1.50
Compare to a typical dealer price of USD $5.88 each. |
|
THROTTLE-SLIDE-GUIDE-BUNA |
Buna-N O-ring to seal the throttle slide guide to the carburetor body on BST carburetors (constant velocity or Quick reference code: OR-16 O-ring to seal the throttle slide guide to the carburetor body on BST carburetors (constant velocity or |
Buna-N USD $0.50Not available separately from Suzuki. |
|
THROTTLE-SLIDE-GUIDE-VITON |
Viton O-ring to seal the throttle slide guide to the carburetor body on BST carburetors (constant velocity or Quick reference code: OR-16-VITON O-ring to seal the throttle slide guide to the carburetor body on BST carburetors (constant velocity or |
Viton USD $1.50Not available separately from Suzuki. |
|
SPN# 09280-46002 |
O-ring to seal the carburetor intake manifold to the cylinder head Quick reference code: OR-17 O-ring to seal the carburetor intake manifold to the cylinder head (SPN# 09280-46002). Fits 1990 - 2023 model years. One is required. Sold each. |
USD $0.50
Compare to a typical dealer price of USD $9.93 each. |
|
SPN# 11177-44B01 |
O-ring to seal the valve inspection covers to the cylinder head Quick reference code: OR-18 O-ring to seal the valve inspection covers to the cylinder head (SPN# 11177-44B01). Fits 1996 - 2023 model years. Two are required. Sold each. |
USD $1.00
Compare to a typical dealer price of USD $5.07 each. |
|
SPN# 31156-48B00 |
O-ring to seal the starter motor to the engine case Quick reference code: OR-19 O-ring to seal the starter motor to the engine case (SPN# 31156-48B00). Fits 1996 - 2023 model years. One is required. Sold each. |
USD $0.75
Compare to a typical dealer price of USD $10.04 each. |
|
SPN# 09280-12012 |
O-ring to seal the oil cooler lines to the engine and oil cooler Quick reference code: OR-20 O-ring to seal the oil cooler lines to the engine and oil cooler (SPN# 09280-12012). Fits 2001 - 2023 model years. Four are required. Sold each. |
USD $0.50
Compare to a typical dealer price of USD $4.49 each. |
|
SPN# 13249-41310 |
O-ring to seal the carburetor drain plug to the carburetor (SPN# 13249-41310) Quick reference code: OR-21-VITON O-ring to seal the carburetor drain plug to the carburetor (SPN# 13249-41310). Available in Viton material only. Viton is more resistant to deterioration when in contact with modern fuels. One is required per carburetor. Fits 1990 - 1993 model years. One is required. Sold each. |
USD $1.50
Compare to a typical dealer price of USD $4.41 each. |